153 Series Fiber Optic Connectors
The 153 Series Fiber-Optic Connectors for Use in Hostile Environments, Now Includes Miniature Single-Channel Connectors
Capable of operating at 10,000 psig (22,000 ft. deep), this connector set as been designed to accommodate multimode fiber sizes 50/125µm or 62.5/125µm or single-mode fiber size 9/125µm. This plug is provided with accommodations for mechanical strength terminations. Configurations are available for bulkhead mounting, weld or in-line (form cable to cable applications).
Description
The connectors can be provided in a variety of materials, including stainless steel (standard), titanium, Hastelloy, Monel and beryllium-copper. The connectors measure 7/8" over the hex coupling ring and feature redundant o-rings for maximum operational reliability.
The average insertion loss is less than 0.5 dB at 1300 nm for each plug/receptacle interface. Operating temperature range is -50ºF to +160ºF (-45ºC to + 71ºC).
Because a fibre optic connector is only as good as the quality of the termination, Teledyne DGO does not supply discrete connectors; we only provide Fiber Optic cable assemblies. These complete fibre optic connection solutions will be shipped fully tested and guaranteed to meet your optical transmission requirements.
Key Features:
- Positive Pressure Barriers to 10,000 psig
- Single and Multi-mode fibers
- 1-15 channels
- Insertion loss less than 1.0 dB
- Return loss less than -35 dB
- Electric/Optic Combinations
- Pressure-balanced oil-filled assemblies
Benefits:
- The receptacle can withstand 10,000 psig open face to provide system integrity in interface flooding.
- Single and multi-mode fiber capable
Specifications
Body |
316/316L Stainless Steel |
Configurations |
Fiber Optic, Electro-Optic, and/or Fiber Optic Pressure-Balanced Oil-Filled (PBOF) |
Operational Temperature |
-50°F to 160°F |
Max Operational Pressure |
up to 10,000 psi (23,000 ft.) |
Material |
Stainless Steel (standard), Titanium, Hastelloy, Monel and Beryllium Copper |
Insertion Loss (nominal value): |
0.5dB per mated receptacle/plug (single mode) |
Return Loss: |
>40 dB |
Wavelength: |
850, 1310 and 1550 nm |
Note |
Because a fiber optic connector is only as good as the quality of the termination, Teledyne DGO does not supply discrete connectors, we only provide fiber optic cable assemblies. As always, these complete fiber optic connection solutions will be shipped fully tested and guaranteed to meet your optical transmission requirements. |
Do you have questions about this product?
- Questions about price, availability, and/or retailers
- Questions about technical specifications and usage
- Questions about suitability for your project or application
Specifications
-
Attribute
-
Electrical/optical
Mate
Type
-
Electrical
-
High speed data {Mbit/s}