BX992 Receiver Enclosure
Dual-Antenna Receiver with Integrated Inertial Navigation System and MSS Band Demodulator
The Trimble BX992 module has been designed for applications requiring continuous centimetre accuracy in a compact package. By integrating inertial sensors on the same module, robust high-accuracy positions and orientations are produced in all environments. The Dual-antenna enclosure is designed for rapid heading alignment and offers continuous positioning in GNSS denied environments.
Description
GNSS and Inertial Tight Integration
Taking advantage of Trimble’s expertize in both GNSS and Inertial technology the Trimble® BX992 module has been designed for applications requiring continuous centimeter accuracy in a compact package. By integrating inertial sensors on the same module, robust high-accuracy positions and orientations are produced in all environments.
Trimble Maxwell™ Technology
The Trimble BX992 supports triple-frequency for the GPS, GLONASS, BeiDou and Galileo constellations. As the number of satellites in the constellations grows the BX992 is ready to take advantage of the additional signals. This delivers the quickest and most reliable RTK initializations for centimeter positioning. For applications that do not require centimeter accuracy the BX992 integrated GNSS-Inertial engine also delivers high accuracy GNSS, DGNSS positions in the most challenging environments such as urban canyons. With the latest Trimble Maxwell™ 7 Technology, the BX992 provides:
- 2 x 336 Tracking Channels
- Trimble Everest Plus™ multipath mitigation
- Advanced RF Spectrum Monitoring and Analysis
- Proven low-elevation tracking technology
With the option of utilizing OmniSTAR or RTX services, the BX992 delivers varying levels of performance down to centimeter-level without the use of a base station.
Robust Centimeter Accurate Solutions
The Trimble BX992 integrates the latest in precision inertial sensors in a compact package. With the BX992 you are buying a robust navigation solution, not just a GNSS receiver. Key features include:
- High update rate position and orientation solutions
- Dual-antenna for rapid heading alignment
- Continuous positioning in GNSS denied environments
- Lever arm calculation from antenna to navigation point of interest
- Robust Moving Baseline RTK for precision landing on moving platforms
Flexible Interfacing
The Trimble BX992 was designed for easy integration and rugged dependability. Customers benefit from the Ethernet connectivity available on the board, allowing high-speed data transfer and configuration via standard web browsers. USB, CAN, and RS-232 are also supported. Just like other Trimble embedded technologies, easy-to-use software commands simplify integration and reduce development times. An intuitive 3D interactive graphical web page allows easy input of lever arms. Dynamic and graphic models for various vehicle types can also be selected.
Different configurations of the module are available. These include everything from a DGPS L1 unit all the way to a four constellation triple-frequency RTK unit. All features are password-upgradeable, allowing functionality to be upgraded as your requirements change.
Specifications
-
More information
-
Distinguishable features
Triple Frequency Dual-Antenna Receiver with Integrated Inertial Navigation System
-
Power
-
Operating power: min. [V]
9
Operating power: max. [V]
30
Typical consumption [W]
3
Connectors
D-sub DE9, DA26, 2 x TNC Female
Certifications
FCC, CE, IC, E-mark
-
Performance
-
No. channels
336
Max. simultaneous tracked channels
336
Tracked satellite signals
GPS: L1 C/A, L2E, L2C, L5; BeiDou: B1, B2, B3; GLONASS: L1 C/A, L2 C/A, L3 CDMA; Galileo: E1, E5A, E5B, E5AltBOC, E6; IRNSS: L5; QZSS: L1 C/A, L1 SAIF,L1C, L2C, L5, LEX; SBAS: L1 C/A, L5; MSS L-Band
SBAS differential signals
WAAS, EGNOS, MSAS, GAGAN, SDCM
Reacqisition time [s]
<2
RTK Network Compatibility
Yes
-
General
-
Type
Aerial, Land, Marine
Year of initial introduction
2017
Height [m]
0.043
Depth [m]
0.093
Width [m]
0.185
Total Weight [kg]
0.76
Housing Material
Aluminum
-
Horizontal uncertainty
-
code: DGNSS/RTC (constant part) [m]
0.25
code: DGNSS/RTC (variable part) [ppm]
1
phase: RTK rapid static (constant part) [m]
0.008
phase: RTK rapid static (variable part) [ppm]
1
Initialization time on the fly [s]
<8
-
Communication: Protocols
-
RTCM standards for differential data
RTCM 2.1, 2.2, 2.3, 3.0, 3.1
CMR standards for differential data
CMR, CMR+
Other formats for differential data
sCMRx
NMEA output format
ASCII: NMEA-0183 GSV, AVR, RMC, HDT, VGK, VHD, ROT, GGK, GGA, GSA, ZDA, VTG, GST, PJT, PJK, BPQ, GLL, GRS, GBS
other output formats
Binary: Trimble GSOF, NMEA2000
L-Band Compatible
Yes
-
Communication: general
-
Communication ports
1 x USB, 1 x CAN, 1 x Ethernet, 2 x RS232
PPS Out
Y
Bluetooth
N
-
Environment
-
Operating temperature: min. [Ā°C]
-40
Operating temperature: max. [Ā°C]
75
Humidity resistance
5% to 95% non-condensing
Water sand and dust proof
IP67
Shock and vibration proof
MIL810D/F
ROHS compliance
Y
WEEE compliance
Y