BD992 Receiver Module
Dual-antenna receiver delivers centimeter accurate positions and precise heading
The Trimble BD992 GNSS system is a single-board solution for precise position and heading. Single-antenna GNSS systems have difficulty determining where the antenna is positioned relative to the vehicle and object of interest, especially when dynamics are low. External sensors can be used to augment this however these tend to drift when static. Heading derived from dual-antenna GNSS measurements overcomes these issues and is now economically the right choice.
Description
The Trimble BD992 supports triple-frequency for the GPS, GLONASS, BeiDou and Galileo constellations. As the number of satellites in the constellations grows the BD992 is ready to take advantage of the additional signals. This delivers the quickest and most reliable RTK initializations for centimeter positioning. With the latest Trimble MaxwellTM 7 Technology, the BD992 provides:
- 336 Tracking Channels
- Trimble Everest PlusTM multipath mitigation
- Advanced RF Spectrum Monitoring and Analysis
- Proven low-elevation tracking technology
With the option of utilizing OmniSTAR or RTX services, the BD992 delivers varying levels of performance down to centimeter-level without the use of a base station.
Specifications
-
General
-
Type
Aerial, Land, Marine
Height [m]
0.0116
Depth [m]
0.06
Width [m]
0.1
Total Weight [kg]
0.060
Year of initial introduction
2017
-
Performance
-
No. channels
336
Tracked satellite signals
GPS: L1 C/A, L2E, L2C, L5; BeiDou: B1, B2, B3; GLONASS: L1 C/A, L2 C/A, L3 CDMA; Galileo: E1, E5A, E5B, E5AltBOC, E6; IRNSS: L5; QZSS: L1 C/A, L1 SAIF,L1C, L2C, L5, LEX; SBAS: L1 C/A, L5; MSS L-Band
Reacqisition time [s]
<2
RTK Network Compatibility
Yes
Max. simultaneous tracked channels
336
SBAS differential signals
WAAS, EGNOS, MSAS, GAGAN, SDCM
-
Environment
-
Operating temperature: min. [Ā°C]
-40
Operating temperature: max. [Ā°C]
75
Humidity resistance
5% to 95% non-condensing
ROHS compliance
Y
WEEE compliance
Y
-
Communication: general
-
Communication ports
1 x USB, 1 x CAN, 1x Ethernet, 3 x RS232
PPS Out
Y
Bluetooth
N
-
Communication: Protocols
-
RTCM standards for differential data
RTCM 2.1, 2.2, 2.3, 3.0, 3.1
CMR standards for differential data
CMR, CMR+
Other formats for differential data
sCMRx
NMEA output format
ASCII: NMEA-0183 GSV, AVR, RMC, HDT, VGK, VHD, ROT, GGK, GGA, GSA, ZDA, VTG, GST, PJT, PJK, BPQ, GLL, GRS, GBS
other output formats
Binary: Trimble GSOF, NMEA2000
L-Band Compatible
Yes
-
Horizontal uncertainty
-
code: DGNSS/RTC (constant part) [m]
0.25
phase: RTK rapid static (constant part) [m]
0.008
phase: RTK rapid static (variable part) [ppm]
1
Initialization time on the fly [s]
<8
code: DGNSS/RTC (variable part) [ppm]
1
-
Power
-
Operating power: min. [V]
3.3
Typical consumption [W]
2.3
Connectors
44-pin header, 2 x MMCX receptacle
-
More information
-
Distinguishable features
Dual-antenna input for precise heading calculation