POLYNAV 2000S
Polynav 2000S MEMS RTK INS/GNSS offers superior, near-FOG performance at MEMS price
The Polynav 2000S is a superior, near FOG -performance GNSS aided MEMS-based Inertial Navigation System (INS) by PolyExplore Inc. The system offers dual antennas for precision heading and a dual-frequency RTK support that provides centimetre-level accuracy with fast conversion time and superior performance during GNSS signal outages through its tightly coupled GNSS and INS systems. The Polynav 2000S supports a fusion of odometer inputs as well as heave estimation for marine applications.
Description
The Polyexplore Inc.’ Polynav 2000 Family of the top-performing GNSS aided Inertial Navigation Systems (GNSS/INS) offers a choice of the tactical grade Inertial Measurement Units (IMU), both MEMS and FOG, to meet the challenging performance, as well as the most stringent budgetary requirements. The Family features a dual-frequency RTK, dual antennas, a Heave measurement for Marine applications, the Distance Measurement Instrument (DMI) assisted dead reckoning for the “urban canyons,” as well as an interface for LiDAR/Radar synchronization and camera triggering for HD mapping applications. The superior centimeter-level positioning and attitude measurement performance of the system combined with an exceptional cost structure.
The Polynav 2000S INS/GNSS features one of the best performing MEMS tactical IMU available. The system delivers superior Attitude and Heading readings, with the Heading accuracy of 0.08° at 1 m baseline as well as Roll and Pitch (RTK) of 0.015°. The dead reckoning feature of the Polynav 2000S allows a low, under 2m over 30-sec, drift during the GNSS outages.
As a member of the Polynav 2000 Family, the system bridges over the MEMS and FOG performances, offering budgetary options for high-precision-minded applications such as HD Mapping, Surveying, and Infrastructure Maintenance.
The Polynav 2000S comes in a ruggedized enclosure with an environmental rating of IP67 for challenging industrial applications. The overall dimensions are 166mm x 134mm x 70mm and weight of ~ 800 g. The OEM version of the system available upon request.
Specifications
-
Other specifications
-
Export restrictions
NO
Graphical user interface
Y
Typical application
Mobile and Aerial Mapping, GIS, Road profiling, Precision Farming, Surveying Equipment, Unmanned Vehicle Guidance, Robotic Control Systems,
-
Environmental
-
Min. operating temperature [Ā°C]
-40
Max. operating temperature [Ā°C]
65
-
Software
-
Filtering
Y
-
GNSS aided uncertainty
-
Heading [deg]
0.08
Pitch [deg]
0.015
Roll [deg]
0.015
-
General
-
Type of application
Air, Land, Marine
Year of initial development
2019
Height [m]
70
Width [m]
34
Length [m]
166
Weight [kg]
800
Min. Voltage (DC)
12
Max. Voltage (DC)
24
Power consumption [W]
5
Splashproof casting
Y
Water resistant casting
Y
Water resistance [m]
2
Type of accelerometer
MEMS
Type of gyro
MEMS
Removable from base plate
N
Moving parts
N
-
GNSS Positioning Sensor
-
Number of integrated GNSS receivers and antenna ports
2
No. channels p receiver
2
Tracked satellite signals
GPS L1/L2, GLONASS FDMA, Beidou, Galleo
SBAS differential signals
Yes
RTK Network Compatibility
Yes
Update rate [ Hz ]
100
Cold start [ seconds ]
60
Hot start [ seconds ]
30
-
Data formats
-
NMEA formats
$GPGGA, $INGGA, $GPRMC
RTCM
Y
-
Inertial Measurement Unit
-
Calibration procedure
NO
Accelerometer bias [Āµ-g]
0.03
gyro bias [deg/hr]
0.3
-
GNSS positional accuracy
-
Horizontal Position Accuracy [ RMS in cm ]
80
Horizontal Position Accuracy (SBAS) [ RMS in cm ]
20
Horizontal Position Accuracy (RTK) [ RMS in cm ]
2