BD982 Receiver Module
Dual-antenna Receiver Delivers Centimeter Accurate Positions and Precise Heading
The Trimble BD982 GNSS system is a single board solution for precise position and heading.
Description
Guidance and Control Positioning
The Trimble BD982 GNSS system is a single board solution for precise position and heading. The product delivers the latest in GNSS signal support delivering multi-constellation RTK baselines between the two connected antennas and to a remote base station. With the Trimble BD982, OEMs and integrators can be assured their investment is sound today and into the future. The Trimble BD982 GNSS supports GPS L1/L2/ L5, GLONASS L1/L2/L3, and BeiDou B1, B2 signals. In addition, Trimble is committed to the next generation of modernized GNSS configurations by providing Galileo and BeiDou compatible products available for customers well in advance of these systems becoming operational. In support of this plan, the Trimble BD982 is capable of tracking Galileo signals for evaluation and test purposes.2
With the option of utilizing OmniSTAR VBS, XP, G2, and HP services, the BD982 delivers varying levels of GNSS performance right down to the sub-decimeter level, even without the use of a base station.
Dual-antenna Input
Single antenna GNSS systems have difficulty determining where the antenna is positioned relative to the vehicle and object of interest, especially when dynamics are low. External sensors can be used to augment this however these tend to drift when static. Heading derived from dual-antenna GNSS measurements overcomes these issues and is now economically the right choice. The BD982 harnesses the power of the 220 channel Trimble Maxwell 6 Technology with dual chips supporting two antennas connected to the board. Independent observations from both antennas are passed to the processor where multi-constellation RTK baselines are computed. A single connection to the board via RS232, USB, Ethernet, or CAN delivers both centimeter accurate positions and less than a tenth of a degree (2-meter baseline) heading accuracy.
Flexible Interfacing
The Trimble BD982 was designed for easy integration and rugged dependability. Customers benefit from the Ethernet connectivity available on the board, allowing high-speed data transfer and configuration via standard web browsers. Just like other Trimble embedded technologies; easy to use software commands simplify integration and reduce development times. All software features are password-upgradeable, allowing functionality to be upgraded as your requirements change.
Compact Design
The compact form factor is suitable for applications where lightweight is a necessity. The BD982 is rigorously tested to perform in the harsh environments your products are built for, with the reliability you expect from Trimble.
Specifications
-
More information
-
Distinguishable features
Dual-antenna input for precise heading calculation
-
Power
-
Operating power: min. [V]
3.3
Typical consumption [W]
2.1
Connectors
40-pin header, 2 x MMCX
-
Performance
-
No. channels
220
Tracked satellite signals
GPS: L1 C/A, L2E, L2C, L5; BeiDou: B1, B2; GLONASS: L1 C/A, L2 C/A, L3 CDMA; Galileo: E1, E5A, E5B, E5AltBOC; QZSS: L1 C/A, L1 SAIF,L1C, L2C, L5; SBAS: L1 C/A, L5
Reacqisition time [s]
<2
RTK Network Compatibility
Yes
Max. simultaneous tracked channels
220
SBAS differential signals
WAAS, EGNOS, MSAS, GAGAN, SDCM
-
General
-
Type
Aerial, Land, Marine
Height [m]
0.0116
Depth [m]
0.0849
Width [m]
0.1
Total Weight [kg]
0.092
Year of initial introduction
2010
-
Horizontal uncertainty
-
code: DGNSS/RTC (constant part) [m]
0.25
code: DGNSS/RTC (variable part) [ppm]
1
phase: RTK rapid static (constant part) [m]
0.008
phase: RTK rapid static (variable part) [ppm]
1
Initialization time on the fly [s]
<60
-
Communication: Protocols
-
RTCM standards for differential data
RTCM 2.1, 2.2, 2.3, 3.0, 3.1
CMR standards for differential data
CMR, CMR+
Other formats for differential data
SCMRX
NMEA output format
NMEA-0183 GSV, AVR, RMC, HDT, VGK, VHD, ROT, GGK, GGA, GSA, ZDA, VTG, GST, PJT, PJK, BPQ, GLL, GRS, GBS
L-Band Compatible
Yes
other output formats
Binary: Trimble GSOF
-
Communication: general
-
Communication ports
1 x USB, 1 x CAN, 1x Ethernet, 4 x RS232
PPS Out
Y
Bluetooth
N
-
Environment
-
Operating temperature: min. [Ā°C]
-40
Operating temperature: max. [Ā°C]
75
Shock and vibration proof
Shock: +/-40g operating; Vibration: 6.2g RMS operating
Humidity resistance
5% to 95% non-condensing
ROHS compliance
Y
WEEE compliance
Y