Description
Specifications
-
Environment
-
Min. operating temperature [C]
-40
Max. operating temperature [C]
70
Casting and coating
Sealed Housing
-
Power Supply
-
Min. Voltage (DC)
18
Max. Voltage (DC)
32
Power consumption [W]
10
-
Accelerometers
-
Num. of Accelerometers
3
Range [max g]
10
Resolution [mg]
1.0
In-Run Bias Stability [mg]
15
Bandwidth [ Hz ]
25
-
Operational
-
Max. rotation speed [deg/s]
200
Interface types
Digital
Interfaces
RS-422
Other interfaces and additional information
2x ARINC 429 output (high speed) 1x ARINC 429 input (low speed)
-
Pressure sensor
-
Pressure sensor
N
-
Gyroscopes
-
Num. of Gyroscopes
3
Range [± ° / sec]
300
Resolution [ ° / s ]
0.02
In-Run Bias Stability [ °/ hr]
0.1
Bandwidth [ Hz ]
25
-
General
-
System components
Accelerometer(s), Gyroscope(s)
Height [mm]
118.4
Width [mm]
115.1
Length [mm]
123.5
Weight [gr]
1360
-
Additional specifications
-
Distinguishable features
Each AHRS510CA is shipped with a 510 Series Installation Manual, and MEMSIC’s GYRO-VIEW 2.6 configuration and display software. An optional ARINC 429 to RS-232 interface cable is available (additional cost) for use with MEMSIC’s GYRO-VIEW and MAG-ALIGN application software running on a PC. The AHRS510CA system utilizes MEMSIC’s CRM-series remote magnetometer to ensure optimum heading alignment.
Application
EFIS and Flight Management Systems, Airborne Antenna Control
-
Accuracy
-
Heading static accuracy [ ° ]
2
Pitch and Roll static accuracy [ ° ]
1