Zenmuse L1
A Lidar + RGB Solution for Aerial Surveying - Instant Clarity. Superior Accuracy.
The Zenmuse L1 integrates a Livox Lidar module, a high-accuracy IMU, and a camera with a 1-inch CMOS on a 3-axis stabilized gimbal. When used with Matrice 300 RTK and DJI Terra, the L1 forms a complete solution that gives you real-time 3D data throughout the day, efficiently capturing the details of complex structures and delivering highly accurate reconstructed models.
Description
DJI AirWorks
Through the annual AirWorks conference, DJI drives the commercial drone industry forward as AirWorks is a hub for innovation and growth, enabling participants in this ecosystem to exchange ideas, gain more control of drone technology, and steer the future development of the industry.
Join hundreds of commercial drone professionals and technology experts at the in-person DJI AirWorks conference in Las Vegas from October 10-12, where you can be a part of the leading discussion on the future of drone technology, share your growth stories, and exemplify the impact of drone technology on your business.
- Integrates a Lidar module, an RGB camera, and a high-accuracy IMU
- High Efficiency: 2 km2 covered in a single flight [1]
- High Accuracy: Vertical Accuracy: 5 cm / Horizontal Accuracy: 10 cm [2]
- Point Rate: 240,000 pts/s
- Supports 3 Returns [3]
- Detection Range: 450 m (80% reflectivity, 0 klx)
- IP44 Ingress Protection Level
- Point Cloud LiveView
Digitize without Compromise
Exceptional Efficiency
Generate true-color point cloud models in real-time, or acquire 2 km2 of point cloud data in a single flight [1] using the Livox frame Lidar module with a 70° FOV and a visible light camera with a 1-inch sensor.
Unparalleled Accuracy
Render centimeter-accurate reconstructions thanks to the high-accuracy IMU, a vision sensor for positioning accuracy, and the incorporation of GNSS data.
Ready When You Are
The IP44 rating allows the L1 to be operated in rainy or foggy environments. The Lidar module’s active scanning method enables you to fly at night.
Livox Lidar Module
- Frame Lidar with up to 100% effective point cloud results
- Detection Range: 450m (80% reflectivity, 0 klx) / 190 m (10% reflectivity, 100 klx)
- Effective Point Rate: 240,000 pts/s
- Supports 3 Returns [3]
- Line Scan Mode and Non-repetitive Scan Mode
RGB Camera
- 20MP
- 1-inch CMOS
- Mechanical Shutter
High-accuracy IMU
- Accuracy: 0.025° (roll/pitch) / 0.08° (yaw)
- Vision Sensor for Positioning Accuracy
- GNSS, IMU, RGB Data Fusion
Recreate the World in 3D Point Clouds
Point Cloud LiveView
Real-time point clouds provide immediate insights onsite, so operators are informed to make critical decisions quickly.
You can also verify fieldwork quality by checking point cloud data immediately after each flight.
Measurement and Annotation
Acquire and communicate critical dimensions on the point cloud model using measurements and annotations.
One-stop Post-processing
DJI Terra fuses the IMU and GNSS data for point cloud and visible light calculations, in addition to conducting POS data calculations so you can effortlessly generate reconstructed models and accuracy reports.
Application Scenarios
Topographic Mapping
Quickly generate topographic maps using accurate digital elevation models.
AEC and Surveying
Manage the full project lifecycle using highly accurate point clouds and 3D models.
Emergency Response
Any time of the day, gather critical insights in real-time using true-color point clouds.
Law Enforcement
Gain situational awareness and forensic intel in real-time to make informed decisions on site.
Energy and Infrastructure
Model sparse or complex structures in detail to manage them efficiently and safely.
Agriculture and Forestry Management
Gain insight into vegetation density, area, stock volume, canopy width, and growth trends.
[1] Over 30 minutes, at a speed of 10m/s, a flight altitude of 100 m, with a side overlap rate of 20%, point cloud density > 200 points/m2.
[2] Flight altitude: 50 m
[3] In operations with two or three returns, the point rate is 480,000 pts/s
Specifications
-
Measurement Characteristics
-
Scanning method
Repetitive line scan mode, non-repetitive petal scan mode
Range accuracy [mm]
30
-
Physical Properties
-
Height [cm]
15.2
Length [cm]
11
Width [cm]
16.9
Weight [kg]
0.9
Water and dust proof
IP44
-
Laser Pulse Characteristics
-
Laser Class
Class 1
-
Operation Characteristics
-
Camera included
Yes
Requirements for compatible UAVs
Matrice 300 RTK
Camera specifications
Sensor Size:1 inch; Effective Pixels:20 MP