Sensonor STIM210 Multi-axis gyro module

Dedicated software

N

Processor

Dual core processor recommended

Width [m]

0.0448

Length [m]

0.0386

Height [m]

0.0215

Housing material

Aluminium, Alloy 6082-T6, DIN EN 754-2

Weight {kg}

0.052

Type of sensor

MEMS

Accuracy

500 ppm

Resolution

24 bits

Angular rate range

±400 °/s

Settling time

1 s

Band width

262 Hz

Input Voltage

5 V

Power Consumption (max)

1.5 W

Data Interface

RS422

Data Rate

1.84 Mbit/s

Operating temperature: min. [°C]

40

Operating temperature: max. [°C]

85

Angle Random Walk (25°C)

0.15 °/√h

Bias Offset

9 °/h

Bias Instability (constant temp)

0.3 °/s

Scale-Factor Non-Linearity (max rate, 25°C)

50 ppm

Scale-Factor Full Temp (≤ 1 °C/min)

500 ppm

Shock Survivability

1500g,0.5ms half sine. Any direction(MIL STD-883G)

More information

Each axis is factory-calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a "plug & play" high-level RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters.

Distinguishable features

Miniature package. ITAR free. Excellent performance in vibration and shock. Excellent environmental robustness. 1, 2 or 3 axes offered in same package. Electronically calibrated axis alignment. Plug & play high-level RS422 interface. 24 bits resolution. Single-crystal silicon technology. Low bias drift. Low noise. Fully configurable:- 5 different sampling rates available - 5 different bandwidths available - LP filter -3dB frequency can be set individually for each axis- RS422 protocol, bit rate and line termination- Selectable output unit: angular rate [deg/s] or incremental angle [deg]Continuous self-diagnostics