Hydrographic Tow Winch 11 KW | 2m/sec
Save time & costs by using a high speed tow winch with automatic depth/altitude systems
Description
The functionality of the winch benefits from the integration of the dedicated Stema Systems software that allows the winch to maintain altitude above the sea/lake floor of the sensors that it is towing. The altitude maintenance functionality has been proven to provide an added safety margin in the deployment of sensors such as a Side Scan Sonar as well as providing consistency of results in the deployment of magnetometers, both needing a consistent altitude for optimal functioning.
The High Speed Winch is designed such that it can rapidly deploy multiple sensors simultaneously up to a depth of 2000 meters. The winch can be operated with Stema dedicated winch software enabling fully automated measurement cycles, which can be displayed on the interface screen on deck. Among the parameters that can be set are: the maximum speed over ground (SOG), speed to lower the sensor, measurement speed. The lowering of the probe can be stopped automatically using various stopping criteria set in the winch software or by manual operation. The latter is enabled by a handheld near the winch and a additional handheld located on the bridge of the ship.
Specifications
-
Physical Properties
-
Weight in air [kg]
380
Width [m]
0.78
Length [m]
1.24
Height [m]
1.17
Housing material
stainless steel
-
General
-
Year of latest version
2018
Type of Winch
Hydrographic High Speed Winch
Typical applications
Sound Velocity Sensors, Rheotune, Side Scan Sonar, Sub-Bottom Profiler, Magnetometers, etc.
Programmable deployment
Yes
Year of initial development
2018
-
Other specifications
-
Distinguishable features
Diameter Sensor, Flashing Light, Measurement and regulation of cable tension, End-stop sensor, Slackwire sensor, Expendable arm to control fleet angle, Able to maintain altitude automatically
Additional capabilities
Able to maintain altitude automatically for hydrographic uses (such as side scan sonar, svs & svp, etc)
Special environmental conditions
Yes, maritime conditions
-
Control unit
-
Winch control menu
Stema dedicated winch software
GUI
Yes
Cable out menu
Yes
-
Winch features
-
Capacity (typical) [m @ diameter in mm]
2000
Motor power [hp]
11
Loads [t]
0.42
Supply Voltage [V]
380
Cable counting system
Yes
Maintaining hover altitude
Able to maintain altitude automatically
-
Winch settings and control
-
Up/Down/Stop
Yes
Stop criteria for automated winches
Can be stopped automatically using various stopping criteria set in the winch software or by manual operation
Speed settings
max. speed: 2m/s
Remote control
Two Handhelds
Slip rings
Yes
Directional control
Yes