Simrad ES18
The Simrad ES18 Is a Split-Beam Transducer Designed for Fish Finding and Underwater Science Applications
The ES18 beamwidth is 11 degrees at nominal operational frequency 18 kHz. The transducer uses 44 "tonpilz" elements organized in four separate sectors. Due to its low frequency, the Simrad ES18 is ideal for use with deep water measurements. Maximum range is approximately 7000 meters.
Kongsberg Discovery
Horten, NO
Description
The transducer is normally mounted flush with the hull plating or the bottom of a blister. The incorporated clamping ring is used to secure the transducer body to a mounting ring. The mounting ring is welded into the hull plating. The transducer can also be flush-mounted in the same manner at the bottom of a blister or a drop keel.
The transducer cable penetrates the hull using a cable gland. This cable gland consists of a bushing, washers, a rubber gasket and a packing nipple.
Key specifications
- Frequency: 18 kHz
- Circular beamwidth: 11 ±2 degrees
- Cable length: 20 metres
- Cable diameter: 12.4±0.5 mm
- Weight (in air, with cable): 85 kg
Do you have questions about this product?
- Questions about price, availability, and/or retailers
- Questions about technical specifications and usage
- Questions about suitability for your project or application
Specifications
-
General
-
Application
-
Mode of operation
-
Beam
Frequency
Configuration
Documents
Brochure
es18-ds-en-a4-3.pdf
531.02 KB
