Omicron Fiber Optic Connector

Connector bodies can also be manufactured in other materials, either to address specific anti-corrosion requirements or to increase depth rating. Engaging nuts are normally manufactured in naval brass to UNS C46400​.

CCP connectors are supplied as standard on a double-ended assembly or with robust moulded ST connectors on the second end. Teledyne Impulse-PDM offers a standard cable, PDM 140, from stock, which can be used for either single-mode or multi-mode applications. The cable can also be customer specified, but as cable types containing optical fibers are varied and complex, their termination is often unique to each type. As such, details should be furnished with the request for quotation so that Teledyne Impulse-PDM can consider any design implications.

The 0-ring sealing face for the BCR connector must be 14mm diameter minimum, of a surface fi nish of 0.8 micrometres and lightly smeared with silicone grease. The connector uses a single-face seal. The mounting thread required is 5/16” - 24 UNF, 2B, the axis of which must be perpendicular to the sealing face. The user must ensure suitable compatibility between materials when using connectors in seawater to avoid bimetallic corrosion. The BCR connector is supplied as standard with an MU-type connector. Adaptor patch cables are available on request. Any installation of the BCR connector must allow the jacketed fiber, on the dry side, up to .08mm of movement during mating and unmating.

Key Features:

• ​Small form factor.
• Single-mode or multi-mode operation.
• Stainless steel construction​.

Specifications