Innomar standard SBP
The Innomar SES-2000 standard sub-bottom profiler acquires full-waveform data in water depths from less than one meter down to 400 metres. The layer resolution is better than 10cm and seabed penetration is up to 40 meters, depending on sediment type and noise level. Main applications are in coastal areas, the built-in active beam stabilisation significantly improves data quality in rough weather conditions.
INNOMAR Technologie
Rostock, DE
Description
The Innomar standard sub-bottom profiler acquires full-waveform data in water depths from less than one meter down to 500 metres. The layer resolution is better than 10cm and seabed penetration is up to 50 meters, depending on sediment type and noise level. Main applications are in coastal areas, the built-in active beam stabilisation significantly improves data quality in rough weather conditions.
The system is portable to be used on vessels of opportunity with very fast and easy mob/demob. The transducer can be pole-mounted or deployed in a moon-pool. For permanent hull-mounting a mounting frame with optimized shock absorbers is available.
The Innomar standard data can be processed with any seismic software (SEG-Y format), but Innomar also provides the ISE post-processing software specialized on the Innomar SBP data.
Katest product generation 2020.
Do you have questions about this product?
- Questions about price, availability, and/or retailers
- Questions about technical specifications and usage
- Questions about suitability for your project or application
Specifications
-
Mode of operation
-
Platform type
Hull Mounted, Side Mounted, Pole Mounted
Operating System
MS Windows
Min. depth of operation [m]
0.5
Max. depth of operation [m]
500
Min. frequency [Hz]
2000
Max. frequency [Hz]
22000
Signal composition
Broadband, Chirp, Dual Frequency
Power output [W]
3500
Max. resolution [m]
0.05
Max. penetration [m]
50
Max. pulse rate [Hz]
50
Max. pulse length [s]
0.0015
Dynamic range [dB]
180
Pitch corrected
N
Roll corrected
Y
Heave corrected
Y
Frequency
Source Level
> 240 dB
Data Rate
96kHz / 24bit
Cable length
30m
-
General
-
Product type
Parametric Sub-Bottom Profiler
Year of initial development
1997
Application
High Resolution
Max power consumption [W]
300
Power type
AC
Transducer weight [kg]
15
Transducer length [m]
0.34
Transducer width [m]
0.26
Transducer height [m]
0.08
Weight of logging unit [kg]
35
Length of logging unit [m]
0.52
Width of logging unit [m]
0.4
Height of logging unit [m]
0.34
Portability of logger
Desktop, Portable, Rack
Power requirements
100 - 240V AC / < 300W
Size (Deck unit)
19'' / 7U
-
Integration in work process
-
Remote operation
Y
External heave input
Y
External roll input
Y
External pitch input
Y
External positioning input
Y
Marking of events
Y
Real time coupling to survey software
Y
Coupling to post-processing software
Y
-
Data Processing
-
Data displayed
Depth, echo plot
Main use
High-resolution seabed exploration for dredging; route and building-site surveys
Data output
Raw data; depth
Formats
NMEA/SEGY/ASCII
Data output for seafloor classification
N
Connections
LAN, Monitor, Printer, RS232, USB, VGA
Internal logging
Hard drive
Post-processing
Innomar ISE software or any SEG-Y software
Related products
