Innomar deep-15 SBP
The Innomar deep-15 sub-bottom profiler acquires full-waveform data in water depths from 20 meters down to more than 11,000 metres. The layer resolution is better than 20cm and seabed penetration is up to 250 meters, depending on sediment type and noise level. Main applications are in shelf and deep-water areas, the built-in active beam stabilisation (roll and pitch) significantly improves data quality in rough weather conditions.
Description
The Innomar deep-15 sub-bottom profiler acquires full-waveform data in water depths from 20 meters down to more than 11,000 metres. The layer resolution is better than 20cm and seabed penetration is up to 250 meters, depending on sediment type and noise level. Main applications are in shelf and deep-water areas, the built-in active beam stabilisation (roll and pitch) significantly improves data quality in rough weather conditions.
The system is designed for permanent hull-mounting.
The Innomar deep-15 data can be processed with any seismic software (SEG-Y format), but Innomar also provides the ISE post-processing software specialized on the Innomar SBP data.
Latest product generation 2019.
Do you have questions about this product?
- Questions about price, availability, and/or retailers
- Questions about technical specifications and usage
- Questions about suitability for your project or application
Specifications
-
Mode of operation
-
Platform type
Hull Mounted
Operating System
MS Windows
Min. depth of operation [m]
10
Max. depth of operation [m]
11000
Min. frequency [Hz]
500
Max. frequency [Hz]
22000
Signal composition
Broadband, Chirp, Dual Frequency
Max. resolution [m]
0.15
Max. penetration [m]
250
Max. pulse rate [Hz]
40
Max. pulse length [s]
0.025
Dynamic range [dB]
230
Pitch corrected
Y
Roll corrected
Y
Heave corrected
Y
Frequency
Power output [W]
10000
Data Rate
48kHz / 24bit
Cable length
30m
-
General
-
Product type
Parametric Sub-Bottom Profiler
Year of initial development
2019
Application
Deep sea
Max power consumption [W]
1000
Power type
AC
Transducer weight [kg]
950
Transducer length [m]
1.75
Transducer width [m]
1.25
Transducer height [m]
0.45
Weight of logging unit [kg]
135
Length of logging unit [m]
0.52
Width of logging unit [m]
0.5
Height of logging unit [m]
0.74
Portability of logger
Rack, Desktop
Power requirements
100 - 240V AC / < 1000W
Size (Deck unit)
19'' / 16U + 19'' / 9U
-
Integration in work process
-
Remote operation
Y
External heave input
Y
External roll input
Y
External pitch input
Y
External positioning input
Y
Marking of events
Y
Real time coupling to survey software
Y
Coupling to post-processing software
Y
-
Data Processing
-
Data displayed
depth, echo plot
Main use
geological surveys, route surveys
Data output
depth, SBP raw data
Formats
NMEA, ASCII, SEG-Y
Data output for seafloor classification
N
Connections
LAN, Monitor, RS232, USB
Internal logging
Hard drive
Post-processing
Innomar ISE software or any SEG-Y software