Geo-matching | Your Product Platform for Surveying, Positioning and Machine Guidance Join Geo-matching now!

Trimble APX-18 UAV

More than Just an IMU, A Complete Soultuion

The Trimble APX-18 UAV is an OEM GNSS-inertial solution with dual GNSS antenna input, designed to georeference LiDAR and other imaging data when collected from Unmanned Aerial Vehicles (UAVs) at low speeds or when hovering.

  • Trimble APX-18 UAV
Applanix
85 Leek Crescent
L4B 3B3 Richmond Hill
Canada
Contact supplier

Visit website
Videos
Turning UAVs into professional mapping solutions
Turning UAVs into professional mapping solutions

Documents
Download brochure

Description

Comprised of a small single OEM board containing a precision GNSS receiver with two antenna heading and inertial sensor components plus POSPac UAV Differential GNSS-inertial office software, the Trimble APX-18 UAV produces a highly accurate position and orientation solution for directly georeferencing LiDAR point clouds and imagery.

Specifications

  • Year of initial development
    2016
  • Height [m]
    0.015
  • Width [m]
    0.1
  • Length [m]
    0.06
  • Weight [kg]
    0.062
  • Min. Voltage (DC)
    3.3
  • Power consumption [W]
    1.5
  • Splashproof casting
    N
  • Water resistant casting
    N
  • Type of application
    Air
  • Min. operating temperature [°C]
    -40
  • Max. operating temperature [°C]
    75
  • NMEA formats
    Yes
  • RTCM
    Y
  • Other
    binary
  • Tracked satellite signals
    GPS L1, GPS L2, GPS L5, GLONASS L1, GLONASS L2, GLONASS L3, Galileo E1, Galileo E2, Galileo E5, Galileo E6, BeiDou B1, BeiDou B2, BeiDou B3
  • SBAS differential signals
    Y
  • RTK Network Compatibility
    Y
  • Update rate [ Hz ]
    200
  • Horizontal Position Accuracy [ RMS in cm ]
    2
  • Horizontal Position Accuracy (SBAS) [ RMS in cm ]
    50
  • Horizontal Position Accuracy (RTK) [ RMS in cm ]
    2
  • Heading [deg]
    0.08
  • Pitch [deg]
    0.025
  • Roll [deg]
    0.025
  • Calibration procedure
    Applanix SmartCal
  • Name
    POSPac UAV
  • Filtering
    Y
  • Adaptable input signals
    Y
  • Integrity monitoring of position input
    Y
  • Graphical user interface
    Y
  • Typical application
    APX-18 UAV produces a highly accurate position and orientation solution for directly georeferencing LIDAR point clouds and imagery at low speeds or when hovering.
  • Distinguishable features
    An OEM GNSS Inertial solution with dual GNSS antenna input,designed to georeference LIDAR and other imaging data when collected from Unmanned Aerial Vehicles (UAV) at low speeds or when hovering.
  • Export restrictions
    Export friendly and is exportable worldwide.

You have selected 2 products to compare you can add 4 more products

Compare [2] products