GNSS Compass
All-In-One GNSS/INS Navigation and Heading Solution
The GNSS Compass is a low cost all in one GNSS/INS navigation and heading solution. It provides accurate dual antenna GPS based heading that is not subject to magnetic interference and can maintain accurate heading during GNSS outages of up to 20 minutes. It features high accuracy RTK positioning and is plug and play with NMEA 0183, NMEA 2000 and Ethernet interfaces.
Description
The GNSS Compass is a low cost all in one GNSS/INS navigation and heading solution. It provides accurate dual antenna GPS based heading that is not subject to magnetic interference and can maintain accurate heading during GNSS outages of up to 20 minutes. It features high accuracy RTK positioning and is plug and play with NMEA 0183, NMEA 2000 and Ethernet interfaces.
FULLY INTEGRATED NAVIGATION
The GNSS Compass is a fully integrated wheelmark certified GPS/INS navigation and heading solution. It contains a 9 axis IMU that is integrated with a dual antenna GNSS system with high performance antennas. It provides higher heading accuracy than magnetic systems and does not require any calibration or setup. The system is plug and play for NMEA 0183 and NMEA 2000 integrations, requiring no setup or configuration.
PERFORMANCE AND INTERFACE OPTIONS
Four product variants are available to cater to every different application and budget. The low cost variant is an L1 only solution that is suitable for commercial vessel navigation while an L1/L2 variant meets the high accuracy requirements of surveying applications. It is also possible to choose between an NMEA 0183/NMEA 2000 interface and a Power over Ethernet interface for maximum flexibility. The Ethernet variant features NTP and PTP timing servers for precise time synchronization.
HIGH ACCURACY 8MM POSITIONING
The high accuracy variant supports L1/L2 RTK to deliver real time position accuracy of 8mm. Both the high accuracy and low cost variant support PPK (post processing) to deliver 8mm position accuracy using the Kinematica post processing software. Both variants support all of the current and future satellite navigation systems including GPS, GLONASS, GALILEO and BeiDou.
MINIMIZED SIZE, WEIGHT AND PRICE
The GNSS Compass dramatically reduces the size weight and cost of attaining a high accuracy position and heading solution. In addition, the plug and play functionality of the device means that anyone can install it in minutes.
Do you have questions about this product?
- Questions about price, availability, and/or retailers
- Questions about technical specifications and usage
- Questions about suitability for your project or application
Specifications
-
Other specifications
-
Typical application
Marine, Automotive, Marine Surveying, Antenna Targeting
-
GNSS aided uncertainty
-
Heading [deg]
0.2
Pitch [deg]
0.4
Roll [deg]
0.4
-
General
-
Type of application
Land, Marine
Type of gyro
MEMS
-
GNSS Positioning Sensor
-
Update rate [ Hz ]
100
-
Inertial Measurement Unit
-
gyro bias [deg/hr]
7