Standard GPS Splitters
Available in 1x2 1x4 1x8
GPS Antenna Splitters are designed to help you distribute the GPS signal throughout your facility with the installation of only one antenna. In the standard configuration, output (J1) passes DC from the connected GPS Receiver through the splitter to the antenna, allowing the GPS receiver to power both the antenna and the splitters amplifier. All other RF outputs are DC blocked and loaded with a 200 ohm resistor to simulate antenna current draw.
Description
GPS Antenna Splitters are designed to help you distribute the GPS signal throughout your facility with the installation of only one antenna. In the standard configuration, output (J1) passes DC from the connected GPS Receiver through the splitter to the antenna, allowing the GPS receiver to power both the antenna and the splitters amplifier. All other RF outputs are DC blocked and loaded with a 200 ohm resistor to simulate antenna current draw.
Do you have questions about this product?
- Questions about price, availability, and/or retailers
- Questions about technical specifications and usage
- Questions about suitability for your project or application
Specifications
-
Operational
-
Design keywords
-
Amplifier
-
Amplifier
-
Tracked signals
-
Tracked satellite signals
Type of GPS measurements
Type of GLONASS measurements
Type of Galileo measurements
Type of Beidou measurements
Type of SBAS measurements
-
Connectivity
-
N-type
Y
Other Connectors
N, TNC, BNC, SMA
-
Environment
-
Operating temperature: min. [°C]
-40
-
General
-
Type
Housing and finish material
Finish Housing and Base Plate: ELECTROLESS NICKEL PLATED MIL-C-26074C CLASS 1, .0001-.0003 MAX Finish Lid: ANODIZE, TYPE II, CLASS 2, BLACK, per MIL-A-8625