CTD60Mc - ultra deep sea
Ultra deep sea probe
The CTD60Mc – ultra deep sea is a high quality, high accuracy memory probe for oceanographic measurement of conductivity, temperature, ambient pressure in depth up to 11000 m (12000 dbar) The CTD60Mc – ultra deep sea is characterised in particu¬lar by its ability to directly output physical and calculated data such as salinity, sound velocity and density
Description
The CTD60Mc – ultra deep sea probe is a small and handy microprocessor controlled multiparameter memory probe for oceanographic measurement with up to 3 sensors and a maximum depth down to 11000 m. It measures electric conductivity, water temperature and ambient pressure.
Data are stored in a standard flash memory with a capacity of 128 Mbytes. Up to 5,5 million CTD data sets can be recorded on this memory
Online operation
This mode is possible up to 350m via RS-232 Interface, but not recommended for this Probetyp. Only for testing.
Memory operation
The memory operation is divided into the following operation modes:
- Continuous mode: each data set is stored.
- Time mode: data sets are only stored at programmable intervals with several selectable schemes.
- Pressure mode: data sets are stored at programmable depth steps.
The CTD60Mc – ultra deep sea is equipped with a 8 channel data acquisition system with 20 bit resolution. A high long-term stability and automatic self-calibration of the analogue digital converter guarantees stable and precise CTD measurements for many years.
The probe power supply is activated by touching a reed contact with a magnetic rod. LED displays power supply status and optical control of memory access.
The supplied Standard Data Acquisition Software package “SST-SDA” includes the handling of the logging process and the display of online or recorded data with a shared graphic user interface. The “SST-SDA” is a part of our shipment.
Standard models:
CTD60Mc – ultra deep sea:
Online and memory probe for measurement of conductivity, pressure, temperature
Standard sensors:
- Conductivity (С)
- Temperature (T)
- Pressure (D)
Calculated parameters:
- salinity
- sound velocity
- Kappa 25 mS/cm (electric conductivity)
- sigma – t (potential density of a fluid)
Specifications
-
General
-
Year of initial development
2018
Weight in air [kg]
3
Diameter [mm]
60
Length [mm]
575
Housing Material
Titanium
-
Observations
-
Min. depth increment [m]
0.01
Min. time increment [s]
0.1
Resolution of salinity [psu]
0.001
Uncertainty of salinity [psu]
0.002
Min. sound velocity [m/s]
1400
Max. sound velocity [m/s]
1600
Resolution of sound velocity [m/s]
0.05
Uncertainty of sound velocity [m/s]
0.1
-
Operation Characteristics
-
Data display on dedicated hardware
N
Method of first recording
internal /external
Display of analogue data
Y
-
Pressure, temperature and conductivity sensor
-
Pressure sensor
Y
Type of pressure sensor
piezo resistive
Resolution of pressure [% FS]
0.002
Accuracy of pressure sensor
up to 0.05
Temperature sensor
Y
Type of temperature sensor
Pt 100 4-pole
Min. temperature [°C]
-2
Max. temperature [°C]
36
Resolution of temperature [°C]
0.0005
Accuracy of temperature measurement
0.002
Conductivity sensor
Y
Type of conductivity sensor
7-pole-cell
Max. conductivity [S/m]
70
Resolution of conductivity [10^-3 S/m]
0.0005
Accuracy of conductivity measurement
0.002
Uncertainty of pressure [% FS]
130
-
Software specifications
-
Software name
SST-SDA
Graphical presentation
Y
Raw data editing
Y
Re-computation with raw data
Y
CTD Probe controller
Y
Recording with third party software
Y
-
Environmental
-
Max. depth [m]
11000
Max. pressure [bar]
1200
Operating temperature: min. [°C]
-10
Operating temperature: max. [°C]
60
-
Data and connectivity
-
Internal memory
Y
Direct data reading
Y
Connectors
RS232
Internal Memory [MB]
16000
Type of internal memory
non-volatile memory
Max. number of samples for self-recording [10^3]
5000000000
Dedicated sub-surface data logger
Y
Dedicated surface data logger
Y
Telemetry link to remote location
Y
-
Power
-
Min. operating power [V]
7
Max. operating power [V]
15
Battery
Y
Battery type
Alkaline / Lithium
-
Additonal sensors
-
Standard sensor
pressure, temperature, conductivity