Your Product Platform for Surveying, Positioning and Machine Guidance Join Geo-matching now!

Wingcopter WINGCOPTER 178 HEAVY LIFT

  • Wingcopter WINGCOPTER 178 HEAVY LIFT
Wingcopter
Kleyerstr. 7
64295 Darmstadt
Germany

Specifications

  • Year of initial development:
    2017
  • Typical applications
    BVLOS-Mapping, Agriculture, Monitoring, Inspection
  • Platform
    Aircraft
  • Brand
    WINGCOPTER
  • Max. payload [kg]
    6
  • Max. stay in the air [min]
    120
  • Max. speed [km/h]
    150
  • Max. height above ground [m]
    4000
  • Propulsion
    Electric
  • ø / wingspan [cm]
    178
  • Weight [kg]
    6
  • Weight of battery [kg]
    8
  • Number of rotors
    4
  • Transport on human back
    N
  • Min. operation temperature [°C]
    -20
  • Max. operation temperature [°C]
    +40
  • Max. wind speed [m/sec]
    15
  • Other sensors and additional information
    Wingcopter products can be controlled fully autonomous, semi-autonomous and fully manual. The semi autonomous flight mode with GPS support and vertical and horizontal position hold functions allow a very easy control of your Wingcopter. A Sense & Avoid system detects obstacles in forward mode and follows avoid patterns for discrete number of scenarios.
  • Correction services [PPK, RTK]
    PPK
  • Onboard imaging/scanning devices
    RGB Camera, Lidar, Additional sensors, Gimbal, NIR Camera, SWIR Camera
  • Type of Camera
    Sony Alpha 7 R II, MicaSense RedEdge
  • Type of Lidar
    Velodyne, RiEGL
  • Additional Sensors and additional information
    The sensor setup is open for customization. The standard mapping package includes a Sony Alpha 7 R II with a ZEISS Batis 2.0/25mm lens. Main applications are BVLOS mapping in an altitude of 75m-500m. Advantages of Wingcopter products are their strong motorization in forward flight allowing high climbing-rates in hilly areas and its compact design that leads to a very small turning circle and the ability to map lines directly next to each other. Combined with the KLAU PPK device, Wingcopter products can be used for high accuracy mapping below 5 cm. RTK is not recommended for BVLOS flights. Standard multispectral cameras are MicaSense and Slantrange products. LiDAR options are based on Velodyne Puck, RiEGL miniVUX-1UAV, miniVUX-1DL and VUX-1UAV with APX-20. Custom payloads can be attached in the sensor box below the Wingcopter.
  • Build-in Stablilsation
    Y
  • Exchangeable
    Y
  • Sensor tilting to allow oblique views
    Y
  • Min. ø of launch/landing site [m]
    5
  • Launching method
    VTOL | Vertical Take-Off and Landing
  • Automatic launch and landing
    Y
  • Training provided
    Y
  • Collision avoidance systems (CAS)
    Y
  • Autonomous emergency landing
    Y
  • Type of software included
    Flight planning
  • Flight planning software
    Airrails
  • Ground computer included
    Y
  • Type of Ground computer
    Standard: Tablet, Custom: Computer
  • Sensor control
    Y
  • Real time image and video download link
    Y
  • Transportation accessories
    Wingcopter products come in a solid coplast transportation box with the dimensions of 1050 x 845 x 600mm. Thus it fits in every station wagon. The box comes with rollers and can be comfortably used by one person. The Wingcopter HL is assembled out of the box within 5 minutes, since the placement of the parts is in order to the assembly.
  • Included batteries and charger
    8 x 16.000 mAh 6S batteries and 1x charger
  • More included products and spare parts
    All Wingcopter products can be customized to your needs. The Wingcopter Heavy Lift offers the highest payload capacity among electric tilt-rotor VTOLs and the attachable sensor box gives additional space for big payloads (500 x 270 x 150 mm). The sensor box can be changed within seconds, thus allowing to use different sensors on the same mission with only one UAV: The Wingcopter 178 Heavy Lift.

You have selected 2 products to compare you can add 4 more products