Wingcopter products can be controlled fully autonomous, semi-autonomous and fully manual. The semi autonomous flight mode with GPS support and vertical and horizontal position hold functions allow a very easy control of your Wingcopter.
A Sense & Avoid system detects obstacles in forward mode and follows avoid patterns for discrete number of scenarios.
RGB Camera, Lidar, Additional sensors, Gimbal, NIR Camera, SWIR Camera
Type of Camera
Sony Alpha 7 R II
Type of Lidar
Additional Sensors and additional information
The sensor setup is open for customization.
The standard mapping package includes a Sony Alpha 7 R II with a ZEISS Batis 2.0/25mm lens. Main applications are BVLOS mapping in an altitude of 75m-500m. Advantages of Wingcopter products are their strong motorization in forward flight allowing high climbing-rates in hilly areas and its compact design that leads to a very small turning circle and the ability to map lines directly next to each other.
Combined with the KLAU PPK device, Wingcopter products can be used for high accuracy mapping below 5 cm. RTK is not recommended for BVLOS flights.
Standard multispectral cameras are MicaSense and Slantrange products.
The only VTOL UAV LiDAR option below 10 kg is the Wingcopter 178 with a Velodyne Puck. For higher payloads we recommend the Wingcopter 178 Heavy Lift.
Custom payloads can be attached in the main body as well as the front part.
Wingcopter products come in a solid coplast transportation box with the dimensions of 1050 x 845 x 600mm. Thus it fits in every station wagon. The box comes with rollers and can be comfortably used by one person.
The Wingcopter HL is assembled out of the box within 5 minutes, since the placement of the parts is in order to the assembly.
Included batteries and charger
4 x 16.000 mAh 6S batteries and 1x charger
More included products and spare parts
1 x Autopilot
1 x 868 MHz telemetry
1 x Remote Controller
1 x Tablet with Ground Control Software