Your Product Platform for Surveying, Positioning and Machine Guidance Join Geo-matching now!

GPS Networking, Inc. MINI GPS Splitter 1x2

MINI-LDCBS1X2

The MINI-LDCBS1X2 GPS Splitter (GNSS Splitter) is a small, lightweight one input, two output device based on the Wilkinson splitter design. The frequency response covers the entire L-band (all GNSS Frequencies) with excellent gain flatness. In the st

  • GPS Networking, Inc. MINI GPS Splitter 1x2
GPS Networking, Inc.
373 E. Industrial Blvd
81007 Pueblo West
United States of America

Description

The MINI-LDCBS1X2 GPS Splitter (GNSS Splitter) is a small, lightweight one input, two output device based on the Wilkinson splitter design. The frequency response covers the entire L-band (all GNSS Frequencies) with excellent gain flatness. In the standard configuration, (J1) passes DC from the connected GPS device through the splitter to the input (antenna port). The other RF output (J2) is DC blocked and loaded with a 200Ω resistor to simulate the antenna current draw to prevent false antenna alarm faults. Available with SMA or SMB connectors. Contact GPS Networking Technical Support with any questions at salestech@gpsnetworking.com or 1-800-463-3063.

Specifications

  • Height [m]
    0.039
  • Depth [m]
    0.0115
  • Width [m]
    0.042
  • Total weight [kg]
    0.0255
  • Type
    Land, Marine
  • Housing and finish material
    Electroless Nickel Plated (MIL-C-26074C CLASS 1)
  • Operating temperature: min. [°C]
    -40
  • Operating temperature: max. [°C]
    75
  • L-Band
    Y
  • Tracked satellite signals
  • Type of GPS measurements
    L1, L2, L5
  • Type of GLONASS measurements
    L1, L2, L3
  • Type of Galileo measurements
  • Type of Beidou measurements
  • Type of SBAS measurements
  • Amplifier
    N
  • Noise figure [max dB]
    1
  • TNC female
    Y
  • N-type
    Y
  • SMA male
    N
  • Other Connectors
    SMA-female, SBM-female
  • Distinguishable features
    The LDCBS1X4 Passive GPS Splitter is a one input, four output device based on the Wilkinson splitter design. The frequency response covers the GPS L1 & L2 bands with excellent gain flatness. In the normal configuration, one of the splitter RF outputs (J1) passes DC from the connected GPS receiver through the splitter to the antenna. The other RF outputs (J2, J3, and J4) are DC loaded with a 200Ω resistor to simulate antenna current draw for receivers on those ports.
  • Design keywords
  • Mounting
    3.25" Base Plate

You have selected 2 products to compare you can add 4 more products