Ask for a quote Visit website
Find dealers / rentals

Write a review


Product Name:CXTLA02-T
Product Description:The CXTILT-Series two-axis inclinometers offer an outstanding combination of resolution, dynamic response and measurement accuracy. The integration of MEMS sensing elements and digital signal processing yields a system that requires no user calibration. Resolution and settling time are programmable, allowing the performance to be optimized for a variety of applications.
Year of last update:
Year of initial development:
System components:Gyroscope(s)
Height [mm]:24.1
Width [mm]:50.8
Length [mm]:30.5
Weight [gr]:65
Power Supply  
Min. Voltage (DC):6
Max. Voltage (DC):30
Power consumption [W]:240
Non-operating shock tolerance [g]:
Operating shock tolerance [g]:2000
Min. operating temperature [C]:-40
Max. operating temperature [C]:85
Splashproof casting:
Water resistant casting:
Water resistance [m]:
Casting and coating:Nylon / Aluminum
Heading static accuracy [ ° ]:
Heading dynamic accuracy [ ° ] :
Pitch and Roll static accuracy [ ° ]:0.5
Pitch and Roll dynamic accuracy [ ° ]:2
Max. rotation speed [deg/s]:20
Interface types:Analog
Interfaces :
Other interfaces and additional information:
Start up time [s]:
Output data formats:
Output frequency [ Hz ]:
Num. of Gyroscopes :2
Range [± ° / sec]:20
Resolution [ ° / s ]:0.03
In-Run Bias Stability [ °/ hr]:
Bandwidth [ Hz ]:6
Non-linearity [ % ]:0.4
Alignment Error [ ± ° ]:
Num. of Accelerometers:
Range [max g]:
Resolution [mg]:
In-Run Bias Stability [mg]:
Bandwidth [ Hz ]:
Non-linearity [ % ]:
Alignment Error [ ± ° ]:
Num. of Magnetometers:
Range [ ± Gauss ] :
Resolution [ microtesla ]:
In-Run Bias Stability [ nT ]:
Bandwidth [ Hz ]:
Non-linearity [ max % ]:
Noise :
Temperature sensor 
Temperatue sensor:N
Temperature measurement range:
Resolution [ ° C ]:
Temperature measurement accuracy:
Pressure sensor 
Pressure sensor:N
Measurement range [ Pa ]:
In-Run Bias Stability [ RMS Pa ] :
Accuracy pressure sensor:
Additional specifications 
Distinguishable features :The CXTLA Series Tilt Sensors use a micro-machined acceleration sensing element with a DC response to measure inclination relative to gravity. The response of the tilt sensor depends on the magnitude of gravity parallel to the sensor element. The output of the tilt sensor will be an offset voltage plus the voltage response proportional to the amount of gravity measured by the sensor.
Application:Scissor Lifts, Static Platforms, Alignment Systems, Laser Leveling

Ask for a quote Visit website
Find dealers / rentals

Supplier Information

  • One Tech Drive - suite 325
  • Ma 01810 Andover
  • Massachusetts
  • United States of America



Other products in Inertial Measurement Units (IMUs)
Download the Brochure
All Product Categories