Ask for a quote
Visit website
Find dealers / rentals

Write a review

MTi 10-series

Product Name:MTi 10-series
Product Description:
Year of last update:2016
Year of initial development:
System components:Accelerometer(s), Gyroscope(s), Magnetometer(s)
Height [mm]:
Width [mm]:
Length [mm]:
Weight [gr]:
Power Supply  
Min. Voltage (DC):34
Max. Voltage (DC):4.5
Power consumption [W]:
Non-operating shock tolerance [g]:2000
Operating shock tolerance [g]:
Min. operating temperature [C]:-40
Max. operating temperature [C]:85
Splashproof casting:Y
Water resistant casting:N
Water resistance [m]:
Casting and coating:IP67
Heading static accuracy [ ° ]:
Heading dynamic accuracy [ ° ] :
Pitch and Roll static accuracy [ ° ]:
Pitch and Roll dynamic accuracy [ ° ]:
Max. rotation speed [deg/s]:450
Interface types:Digital and/or Analog
Interfaces :RS-322, RS-422, RS-485, USB, UART
Other interfaces and additional information:GPIO’s and options: SyncIn, SyncOut, 2x GPIO, Clock sync
Start up time [s]:
Output data formats:
Output frequency [ Hz ]:2000
Num. of Gyroscopes :3
Range [± ° / sec]:450
Resolution [ ° / s ]:0.01
In-Run Bias Stability [ °/ hr]:18
Bandwidth [ Hz ]:415
Non-linearity [ % ]:0.03
Alignment Error [ ± ° ]:
Num. of Accelerometers:3
Range [max g]:5
Resolution [mg]:
In-Run Bias Stability [mg]:40
Bandwidth [ Hz ]:375
Non-linearity [ % ]:0.03
Noise:80 µg/√Hz
Alignment Error [ ± ° ]:
Num. of Magnetometers:1
Range [ ± Gauss ] :
Resolution [ microtesla ]:
In-Run Bias Stability [ nT ]:
Bandwidth [ Hz ]:
Non-linearity [ max % ]:0.1
Noise :200 µG/√Hz
Temperature sensor 
Temperatue sensor:N
Temperature measurement range:
Resolution [ ° C ]:
Temperature measurement accuracy:
Pressure sensor 
Pressure sensor:N
Measurement range [ Pa ]:
In-Run Bias Stability [ RMS Pa ] :
Accuracy pressure sensor:
Additional specifications 
Distinguishable features :XSENSs MTi-series is the industry standard from the undisputed leader in MEMS AHRSs. MTi 10-series is available as OEM board and IP67 encased MTi. 24-pins connector for OEM. Extensive suite of output formats, available directly from the MTi. Choice of several interfaces, onboard USB, 2+ GPIO’s. Xsens’ industry standard open Xbus protocol or NMEA (e.g. TSS1). All products from the MTi-series are fully interchangeable.
Application:Control and Stabilization. Navigation and correction. Measurement and Testing. Surveying and indoor mapping. Data acquisition and monitoring.

Ask for a quote
Visit website
Find dealers / rentals

Supplier Information
  • Xsens

  • P.O. Box 559
  • 7500 AN Enschede
  • Netherlands



Other products in Inertial Measurement Units (IMUs)
All Product Categories